What Are Glycol Chiller Systems?

Glycol chiller systems are widely used across UK industries where precise temperature control is required. From food and beverage production to pharmaceutical manufacturing and industrial processing, these systems provide stable and controlled cooling using a glycol-water mixture as the heat transfer medium.

Unlike standard water chillers, glycol chillers use a glycol-based solution that lowers the freezing point of the circulating fluid. This makes them suitable for processes requiring sub-zero temperatures and environments subject to low ambient conditions.

At a fundamental level, glycol chiller systems remove heat from a process and transfer it away through a refrigeration circuit. The cooled glycol solution is then pumped through pipework to absorb heat from equipment or products before returning to the chiller.

The Operating Principles of a Glycol Chiller

A well-considered glycol chiller system design supports efficiency and stable operation. Core components typically include:

• Compressor


• Heat rejection condenser


• Evaporator heat exchanger


• Expansion valve


• Integrated buffer tank and circulation pump


• Control panel

Within the evaporator, the refrigeration cycle extracts thermal energy from the secondary fluid. The chilled solution is then sent to the process load, absorbs heat, and flows back to the unit.

A typical glycol chiller system diagram shows two distinct circuits. The refrigeration loop manages heat removal, while the glycol loop transfers chilled fluid to the point of use. Accurate schematics are valuable for commissioning and diagnostics.

Glycol Chiller System Control Panel

The glycol chiller system control panel acts as the central interface for monitoring and adjustment. Modern panels typically include:

• Digital temperature controllers


• PLC or microprocessor interfaces


• Pressure protection cut-outs


• Pump sequencing controls


• Alarm notifications


• BMS or remote access integration

The control panel regulates compressor operation, maintains setpoint temperatures and monitors system pressures. Many systems also log performance data to support service planning and operational records.

In facilities requiring precise cooling, reliable control minimises fluctuations that might compromise process stability.

Control Panel Installation Considerations

Proper glycol chiller system control panel installation is essential for safe operation and long-term reliability. Key factors include:

• Electrical compliance – Connections must align with UK wiring regulations and include suitable isolation and circuit protection.


• Location and ventilation – Installation should avoid damp conditions and excessive ambient temperatures.


• Commissioning procedures – Qualified engineers should verify sensor calibration, test alarms and confirm pressure switch operation.

Commissioning ensures the unit operates in line with the original glycol chiller system design specifications.

Key Factors in System Design

Effective glycol chiller system design begins with detailed analysis of process requirements. Engineers evaluate:

• Target operating temperatures


• Flow rate and pipe sizing


• Ambient environmental conditions


• Redundancy or backup requirements


• Future expansion potential

Oversized systems increase energy consumption, while undersized units struggle to maintain setpoints. Load calculations must consider maximum usage scenarios and continuous duty patterns.

Fluid selection also plays a role. Food-related industries often favour propylene glycol for safety reasons, whereas ethylene glycol can be chosen for applications prioritising thermal performance.

Additional considerations such as pipe insulation, pump specification and heat exchanger configuration influence stability, efficiency and lifespan.

Applications of Glycol Chiller Systems

Glycol chiller systems support numerous sectors across the UK, including:

• Breweries and distilleries


• Dairy and food processing facilities


• Pharmaceutical production environments


• Laser and medical equipment cooling


• Plastics processing and injection moulding


• Refrigerated storage applications

For example, in beverage production, chillers maintain fermentation temperatures and cool storage tanks. In manufacturing settings, they protect equipment from excessive thermal build-up.

Protecting System Performance

Routine maintenance supports consistent output and equipment longevity. Typical servicing tasks include:

• Testing fluid concentration and condition


• Assessing circulation components


• Cleaning condenser coils


• Verifying control panel settings


• Monitoring refrigerant pressures

Over time, glycol can lose effectiveness through dilution or contamination, reducing heat transfer efficiency. Regular testing helps maintain optimal performance.

When correctly designed, installed and maintained, glycol chiller systems can provide reliable service for many years.

Common Queries About Glycol Chiller Systems

What is the typical glycol percentage?

The required percentage depends on freeze protection and operating temperature, commonly ranging from 20–40%.

Can a glycol chiller be installed outdoors?

Yes, provided the unit is rated for outdoor use and protected against environmental exposure.

How does a glycol chiller differ from a water chiller?

Unlike water-only systems, glycol-based chillers resist freezing and support sub-zero applications.

Is remote access available?

Many contemporary glycol chiller system control panels integrate with BMS platforms or secure remote systems.

How often should glycol fluid be tested?

Fluid condition should be reviewed regularly based on system workload.

Where are they most commonly used?

Food production, beverage processing, pharmaceuticals and precision engineering rely heavily on glycol cooling.

Final Considerations

Glycol chiller systems deliver dependable cooling performance across a broad range of industrial and commercial applications. From careful glycol chiller system design to compliant control panel installation and structured maintenance, every stage affects efficiency and longevity.

Whether planning a new installation or upgrading existing equipment, working with experienced specialists ensures compliance with UK standards and operational requirements. For technical advice and tailored solutions, consult the Newsome glycol chillers page to explore engineered glycol cooling solutions designed for long-term performance.